QuestionI have a 2000 Chrysler 300m. I was wanting some knowledge on how to remove and replace the rear speakers? I have attempted to remove the rear deck 6x9s but they are bolted frome the top. I am not shure how to remove the carpeted deck cover? I would appreciate some knowledge on removal of the rear door speakers too. Also I replaced the front door speakers, it seems there is only a low freq coming out of the speaker. I bought some infinity 60121 6.5 and there is no highs at all coming out of the speakers. I returned them for a new pair, but same thing happens. Is that the way the system is designed, only mid to low freq out of the door speakers? Thanks.....
Answer" Is that the way the system is designed, only mid to low freq out of the door speakers?"
Yes.
It is very likely that the system uses passive or active crossovers and component amplifier(s) which will need to be dealt with, accordingly.
For liability reasons, I do not do walkthroughs for basic Removal and Re-installation.
This is why there are local professional installers. I just cannot expect a novice to understand (much less deal with) all the problems that might arise after the email is read. A quick price check on some of the interior parts involved, will justify this thought.
*Not to mention that many vhicles have, in fact, been reduced to cinders over the most simple upgrade by novices with the best of intentions!
Your best bet is going to be http://crutchfield.com/
There, you can get all the factory-interface info you need plus online live help via CSR.
Jmael
