Audio Systems: Citroen Saxo (UK) radio wiring, panasonic cq, citroen saxo

Question
This may seem a simple question, but I can't find the answer. I have an '02 model Citroen Saxo (UK), and have recently purchased a Panasonic CQ-C1300AN radio/MP3 player to replace the factory fitted radio. The speaker connections I have no problem with, but there are 3 different wiring combinations for the power socket, namely Standard ISO, Type A and Type B. I am assuming it will be Standard ISO, but don't want to get it wrong and blow the radio. Is the connection on the Saxo Standard ISO?

I realise this is an American site, but any info would be gratefully received.


Answer
Mick,
The standard ISO should be OK to use. Make sure that none of the speaker connections are grounded! Also make sure that the factory power wires go to the correct wires the the new stereo, namely,,12 volt hot at all times(memory),,12 volt switched (main power)with the key on,,powered antenna out if used,,and ground.

TOM,
T&D ELECTRONICS
tdeser@zoominternet.net