Audio Systems: ford mach 460 speaker wiring, factory amps, mustang cobra

Question

-------------------------
Followup To
Question -
Hi Tom,
I have a 1996 Mustang Cobra and I'm replacing the mach 460 head unit with a dension dh200. I obtained a wiring kit, but I was sent the wrong one. I have re-ordered the correct kit, but as I'm in the UK it could be weeks before it turns up. I can adapt the wiring I have, but I need to be sure of the speaker connections. The dension has 4 RCA line connectors, and I want to retain the factory amps. The factory harness has a black square plug with 8 pins. Can you tell me which pins are for which speaker, and which are positive and negative?

Thanks,

Jerry
Answer -
Hello Jerry,
To give you the correct wiring of the output connect/s I will need the complete model number off this stereo.


TOM,
T&D  ELECTRONICS
tdeser@zoominternet.net



Hi Tom,

The part number on the head unit is F4ZF-19B165-BC.

Thanks again,

Jerry

Answer
Jerry,
I don't have a book for your exact model, however I do have books for that year stereos. If possible can you send me a drawing of exactly what the rear connector block/s on the rear of your stereo looks like. Send the drawing direcly to my Email address.

TOM,
T&D ELECTRONICS
tdeser@zoominternet.net