Cadillac Repair: computer read-outs, traction control system, cadillac seville

Question
Hello:I have a !995 Cadillac Seville SLS,the trunk open and check oil displays.I have had the oil sender changed,along with resetting both the oil life back to 100%, after latest oil change,and reset the computer by the manual instructions.Then I wrote down the following computer read-outs. P052 History/P109 History/P137 History/Code 1032 or I032C/Code1042H Or I042H/ code 1052H or I052H.Along with No ACP Code/ No Sir Code/ No TCS Data/ No RSS Codes and PCM? This engine has only 24,000 miles on a full rebuild. One issue that happened was when the motor was rebuilt,they had left the transmission wires touching the exhaust, which I had a tranny shop repair.This all the history, What need to Know is what the computer readouts above mean, and any suggestions on how to rectify the two readouts on the trunk open and check engine oil.
                                     Thanks Jim

Answer
The only code you need to worry about is the I032 CURRENT.  Which is a fault in your braking and traction control system.

Most likely a sensor was left unplugged when the engine was replaced.

You need to CLEAR (erase) ALL the codes from the computers via the climate control panel ONLY.

Disconnecting the battery or pulling fuses will NOT clear the codes.

Please e-mail: onlineautohelp@msn.com

for pictures and further directives as this website only allows 1 picture and you need several.