QuestionQUESTION: The pully located at the bottom of the accesory belt has movement in it. How do I stop it. I believe that it is the water pump pully. I can easily remove the belt but I want to make sure that I can repair the pully. Thank you in advance.
ANSWER: 4.6L or 4.9L engine ?>
---------- FOLLOW-UP ----------
QUESTION: Sorry 4.6L
ANSWER: Your NOT referring to the water pump as the pump is on TOP of the engine. E-mail: onlineautohelp@msn.com for a picture of the components that use the belt.
---------- FOLLOW-UP ----------
QUESTION: ok the crankshaft that has movement in it, how do I fix it? Also the a/c compressor is bad, can I drive it like that or will there be a problem? Thank you
AnswerIn the center of the crankshaft there is a bolt. See if you can tighten it. Remove the serpentine belt FIRST.
If the A/C compressor is unplugged at the 2 wire electrical connector just behind the belt pulley and when disconnected IF the noise STOPS, You can drive the vehicle.
If the noise does NOT STOP, You will have to replace the A/C compressor and or the A/C compressor pulley & bearing assembly.
If you are mechanicaly inclined or know of someone who is, You will need simple electrical schematics, Test procedures and picture locations of the components within the system that is causing you problems of which can't be done on this website which only allows one picture. I do not have a website so you will have to e-mail: onlineautohelp@msn.com in order to obtain the information.
