Chevrolet Repair: Installing Wiper Arm, drive shaft, wiper blade

Question
How do I replace a wiper arm for a 2000 Chev Impala?

Answer

wiper arm REMOVAL PROCEDURE






Turn the ignition switch to the ACCY position.
Set the wiper switch to the PULSE position.
Turn the ignition off when wiper arms are at the bottom of the wipe pattern (innerwipe) and not moving.
Disconnect the washer hose from the washer nozzle.
Remove the cover from the nut.
Remove the nut from the wiper arm and the wiper transmission drive shaft. IMPORTANT: A J 39822 Wiper Arm Puller may be used if the wiper arm cannot be removed from wiper transmission drive shaft by rocking. The pin from the new wiper arm may be used to ease removal.
Remove the wiper arm from the wiper transmission drive shaft by rocking.
Remove the wiper blade from wiper arm.

reverse to install.