Chevrolet Repair: firing order, s10 blazer, firing order

Question
Hi
Hi I need to know the firing order for a '94 s10 blazer 4.3L V6,single fule inj.I have it as 165432 but I am not sure where 1 is on the dist. cap.Can you tell me in a way I will be sure or point me towards a site with a diagram?
Thanks in advance,Mike

Answer
Hi Mike.... easy way is too line up the timing marks on the crank pully and block...pull the number 1 plug, make sure piston is at TDC, pull dist cap and see where rotor is pointing... should be towards number 1 plug. if not you are 180 deg out... if it is ok then install cap and put nimber one wire in cap where rotor is pointing too, then order  is clockwise from that point...i cannot send pics over this site...you may try googleing it....hope this helps