Chevrolet Repair: 1982 K5 blazer, gadges, exhaust ports

Question
i dont know how to hook up my (oil,temp)gadge's there not stock. on the oil pressure gadge do I hook it up to the block or where. same thing with my temp gadge dont know where to hook that up ether.the gadges are pretty easy to put in i just dont know where they go, please help me. thanks adam.

Answer
Hey,

 There are two possible places that the OPS normally goes.  On the back of the block behind the intake.  You might need a 90' fitting if the distributor is in the way.  There is also an oil feed plug above the filter on the drivers side.
 The CTS usually goes in the drivers side cylinder head between the first two exhaust ports or in the thermostat housing or the manifold.

Wayne