Chrysler Repair: Removing alternator from 1998 Chrysler Sebring Convertible 2.5L V6, chrysler sebring convertible, chrysler sebring

Question
Hi Roland.  I'm trying to remove the alternator from my '98 2.5L V6 Sebring convertible.  There are 2 cables attached to it.  I got the "B+ Terminal" cable off by removing the small plastic cover over it and using a 10mm open end wrench.  The other cable is called "field circuit" in the manual.  I don't want to break it.  Do I just pull it out, do I need to push the connector to loosen it, or does it come off some other way?  Thank you.

Answer
Hi Bill,
The manual simply says 'unplug'. If there is a tab on the edge of the plug you would lift that gently to release the plug. Otherwise simply pull on the plug, not the wire.
Roland
PS Please use the 'thank/rate' tab to rate my answer, and where you see the question about a nomination of me to be 'volunteer of the month' consider a 'yes' response. Thank you