Chrysler Repair: sebring limp mode, solenoid pack, scanner model

Question
Hi russell.  I'm in need of some help. My 1997 sebring has a 2.5l v6 motor with automatic trans.  It goes in limp mode and the codes I'm getting on my snap on scanner model mt2500.  Is 23 2-4 od pressure switch circuits.  And 80 body computer odometer failure. I changed the filter and fluid in trans 2 times to flush it out. And checked wires.  Any help would be great.  Thank you.  The car has 125000 miles and is a coupe.

Answer
If you only have the one DTC for the OD solenoid and no other transmission DTC's, it would be a safe bet that you may have an issue with the solenoid pack on the transmission, One question though, does the transmission go into Limp-In mode if you drive it in the 3rd gear mode instead of OD? And as a side note, the codes from your Snap On code reader have no correlation to any known code readouts that I am aware of.