Chrysler Repair: Chrysler 2000 300m, wiring connector, ground lead

Question
Power windows stop working, checked cicuit breaker, fuses, master controller; still not working what is the problem

Answer
I suspect you may have a broken wire between the body and drivers door. You will need to remove the drivers door trim panel to gain access to the window switch wiring connector. Once the panel is off disconnect the Blue wiring connector and using a test light, check for voltage by connecting the ground lead of the light to cavity 10, black wire, and probing cavity 1,Tan wire, with the other end of the test light. If the light does not illuminate then you know that you have a broken wire.