Chrysler Repair: no spark: 92 3.9L, hi matthew, dodge dakota

Question
hi i have a 92 dodge dakota 3.9L 2wd i was driving down the road one day and the truck all of the sudden cut off no stall or anything just dead so i would wait about thirty minutes to start it back  up and it would run great then cut right off and now it wont come on att all now it has no spark and i already change crank sensor pick up coil cap and rotor and egnition coil i really need help please i tried everything its been broke down for two weeks

Answer
Hi Matthew,
Have you tried for fault codes using the ignition key:"on-off-on-off-on and leave on" doing that in 5 seconds or less elapsed time"? Then watch the check engine light to flash, pause, flash, etc. Count the number of flashes before each pause. Then repeat to be sure that you get a consistent count set. Let me know the flash counts in the order of appearance. Those numbers will be codes that tell us what the engine controller thinks is wrong. I don't have a manual for the engine in your vehicle but the fault codes are consistent across the engine line.
By 'pick-up coil', are you speaking of the position sensor that is inside the distributor?
Roland