Chrysler Repair: back seat removal, sebring chrysler, seat removal

Question
Hi how can i remove the back seat of a sebring Chrysler convertible 2010 model,The base part.
thanks

Answer
Hi Philip,
I only have the '06 manual but unless things changed by '10 it should apply. There are a couple latches in the floor board to which there are wire loops on the under side of the base cushion attach. Each is a bit outboard of the middle of each of the two passenger's seating positions. If you push back firmly on the lower edge of the cushion at each of those points and while pushing back then lift the lower edge then the loop should clear the latches and release. Do them one at a time. Install is the reverse, but make sure the sockets at the rear of the cushion align with the pins into which they fit before reattaching at the front using the same technique.
Roland
PS Sorry for the delay but I just found your question in the 'pool'. Let me know if this works. Thanks