Chrysler Repair: upper ball joints: Cirrus:, upper ball joints, chrysler cirrus

Question
hi, i would to know on a 95 chrysler cirrus on the upper ball joints can you press the old joints out or do i have to buy the hole joint set up? an this is on the front.

Answer
Hi James,
If the upper ball joint is defective you have to replace it as a unit with the control arm. To test the joint, try moving the grease fitting by hand when the vehicle is sitting on the ground. If the grease fitting won't move by hand then it is alright. It it moves easily it should be replaced. This is according to the '97 manual which I would believe applies to your '95.
Roland
PS Please 'rate' my answer.