Chrysler Repair: 2000 Chrysler Concorde headlamp assembly, headlamp assembly, chrysler concorde

Question
I have a cracked LH headlamp assembly.  I have the replacement part.  I could use some help on how best to remove the broken headlamp and replace it.  The cracked headlamp still works, so I'm timid to remove it until I know the proper process to do so.  Thank you.

Answer
HEADLAMP HOUSING - INTREPID
Headlamp lens fogging is a normal condition and does not require service unless excessive or continual. Moisture will vent from tubes or vents located on the back of the lamp.

REMOVAL
1.Release hood latch and open hood.
2.Remove jackscrews attaching headlamp to body Headlamp Housing - Intrepid
3.Remove headlamp from body.
4.Disconnect wire connector from headlamp and parking, side marker, and turn signal lamps.
5.Remove headlamp housing from vehicle.
INSTALLATION
1.Place headlamp housing in position on vehicle.
2.Connect wire connectors to headlamp, parking, side marker, and turn signal lamps.
3.Place headlamp in position on body.
4.Install screws to attach headlamp to body.
5.Verify headlamp operation and alignment.