Chrysler Repair: Replace-headlight-bulb in Chrysler Sebring, chrysler sebring, headlamp

Question
Good Morning.  I'm trying to change the driver side bulb in my 2003 Chrysler Sebring(4 door, 4 cylinder) but don't see how I can remove the bulb.  I was told to just remove the two headlight mounting screws which I don't see.  Also there is no room behind where the bulb is, I can barely get my hand back there.  I've changed bulbs in other cars before and never had a problem, typically you turn around 90 degrees counter clockwise and it twist out.

Thanks

Answer
Hi Eric,
You have to remove the entire headlamp mounting fixture to get to the rear of it where the bulb is located. I have looked carefully in the '03-'06 manuals for a detail on that procedure. The best I have been able to locate is that there are two screws mounted vertically  from above the fixture, via holes in the panel that covers it. One is at the outboard edge and one is at the inboard edge of the panel (about in line with the edge of the grille). Try removing those 2 screws and see if the housing comes out entirely.
Let me know if you find something different, but that is the idea.
Roland