Chrysler Repair: Need Amplifier wiring diagram/pinouts for 96 Sebring Convertible and 02 Sebring Coupe, sebring coupe, infinity sound

Question
Hi - and thanks in advance for your time!

I have a '96 Sebring Convertible (JXI/2.5l v-6) with the "premium" "infinity" sound system.

Amp under passenger seat got flooded and fried.  Cannot find a replacement.

Managed to obtain an amp from an '02 Sebring coupe - also under passenger seat - and about a foot of its wiring.

I'd like to be able to splice the wires so as to hook this '02 amp into my '96 car.

Ergo, I need the amplifier wiring diagram, or a list of pinouts for the amp connections - for both of them.

Thanks again for your help and your time!!

Alan/DD

Answer
Hi Alan,
That is going to be a challenge because those vehicles (except for the 'Sebring') are really not related as far as I can understand. The coupe seems to be Japanese in design and manufactured in Mexico while your convert was Detroit in design and manufactured in the US. The wiring diagrams I have for the '96 convert give pin-out purposes, but the manual I have for the '00 Sebring coupe (the nearest in time that I have) are a bit obscure as a number of wires shown in the schematic relate to the control unit and their purposes are not listed in the drawing. There is no pin-out list for the plugs.  Any chance you can return the amp and get one from a domestic Sebring?
Roland