Chrysler Repair: starter motor, sebring conv, chrysler sebring

Question
I have a 1999 Chrysler Sebring Conv. with a 2.5 liter V6, I'm looking for the starter motor. Could you please explain where it is located,as I am going to replace it.

Answer
2.5L ENGINE
REMOVAL
1.Disconnect battery negative cable from remote negative terminal on shock tower Remove Remote Battery Cable at Shock Tower
2.Raise vehicle.
3.Remove oil filter.
4.Remove battery positive cable nut from starter and remove cable Wire Terminal Connection - 2.5L Engine
5.Disconnect push on solenoid connector.
6.Remove three bolts attaching starter to transmission housing and remove starter from vehicle.
INSTALLATION
For installation, reverse the above procedures. Clean corrosion/dirt from wire terminals before installing wiring to the solenoid