Chrysler Repair: brakes are too spongy, brake warning light, rear brakes

Question
hi i put new brake pads on the front of the chrysler,bleed it but the brakes are stll soft and goes right down,don,t know what,s wrong any advise?

Answer
Hi Luke,
Did you try the pedal with the engine running, and press it very slowly to the floor?
Is the brake warning light "on" when you turn the key to run without starting the engine?
Did you check the booster vacuum hose fittings?
When you bled it, did you first bleed the rear brakes, and then bled the front?
Let me know and we'll go from there.
Roland