Chrysler Repair: 02 300M trac off and ABS lights on, wheel alignment, postal mail

Question
On my 02 300M I have the abs and trac ligt on. I took it to a garage and had it scanned and the tech tells me that my abs pump is bad. He shows me no codes just the reader on the machine that say abs pump.
Is there any other issues that will cause the scanner to show the abs pump being bad such as a bad caliper, bad speed sensor, pinched line or battery going bad?

I recently replaced both control arms, had two new tires put on and a four wheel alignment done. I checked all the sensors at the wheel for damage and

Answer
Hi Corey,
There are about a dozen possible causes for the pump error code. There are 14 tests you my be able to run to figure exactly why you have this code. I can most easily xerox copy and postal mail you the pages from the manual. Tell me a postal mailing address in the remarks section of your evaluate/rate response to this answer.
Roland
PS Sorry for the delay but my computer failed recently.