Chrysler Repair: 2001 chrysler 300 battery replacement, chrysler 300, splash shield

Question
How do I remove the battery for a chrysler 300 (2001) and do I reverse the procedure for installation?
Thanks,

Answer
Hi Mark,
The battery is on the right front of the engine compartment, hidden under the air filter housing.
Turn the steering wheel full right. Then turn off ignition and all accessories.
Then remove - remote battery cable from remote battery post, near the right strut tower.
Remove the air cleaner housing.  (bracket on right fender panel)
Remove battery splash shield
Remove two short bolts from the battery hold down amd remove hold down
Disconnect + cable from battery
Slide battery to rear of vehicle
Disconnect - cable from battery
Remove battery
Install is the reverse.
I hope this is in enough detail to get the job done.
Roland
P.S.: May I ask a favor of you? I would appreciate your rating my answer by clicking on the "Thank/rate expert" button below/left. Please notice the question just below the ratings which asks if you would like to nominate me to be 'volunteer of the month'? That recognition is based on the number of 'Yes's I get from questioners like you, one 'Yes' per each answer is allowed. Thank you in advance for your giving me a 'Yes'.