Chrysler Repair: Blower only on high in the back: T&C, heater blower resistor, blower motor resistor

Question
I just replaced the AC/Heater blower resistor.  I did this because the blowers for the front and back of my 2002 Chrysler Town and Country would only blow on the high setting.  Well now the front blower will work on all settings but the rear blower still will only work on the high setting.  Am I missing something or what else could be wrong?

Answer
Hi Richard,
There is a separate blower motor resistor in the rear control unit which has 2 resistors which are probably blown. The unit has a light green plug, and if you find there to be no connection between pin 2 and pins 4 or 5 to be infinite that would be sign the they are blown. The manual doesn't show the location of the resistor pair but it should be near the motor. I would check at the dealer to see exactly where to find it and see if you can buy a replacement.
Roland
PS: Please 'rate' my answer and consider giving me a nomination to be 'expert of the month' for December. Thanks