QuestionI have a 2001 grand caravan with 3.3 flex replaced fuel pump and filter. The van will not run after replacing the fuel filter van ran fine till I shut it off then would not start. Replaced the fuel pump and same thing happened again ran fine and then would not start. Van will start if I let it sit till its cold but wont idle. Has error codes p0106,p1282,p0121,p1193. Please help.
AnswerHappy New Year, Glen!
May I ask for your help?
I need your vote of confidence.
I'm in a close race to be recognized as 'Volunteer of the Month' at Allexperts
Purely symbolic, but it means alot to me.
Please click on "Thank/rate the expert" button below/left
It will take you to a page which asks "Would you like to nominate this expert...?"
Click on the "YES"
That's it.
Thanks for taking a moment to help a fellow Chrysler-owner.
Roland
PS:Do it now, the contest closes at 6pm central time.
Hi Glen,
The problem with starting is probably due to an inaccurate MAP sensor and an inaccurate intake air temp sensor. That is how I would interpret the codes. There is one stale code, I believe, about the full pump relay. So replace the MAP (located near the power steering pump reservoir) and the temp sensor (located near the corrugated rubber inlet tube) and I would expect the engine will run right.
Sorry for the delay, but I just saw your question in the 'pool' of questions sent by the other expert.
Roland
