Chrysler Repair: Neon Instrument Cluster, plymouth neon, outer areas

Question
How do i remove the Instrument Cluster on a 1998 Plymouth Neon ?
I need instructions how to get the Dash off to get to the cluster.

Answer
CLUSTER
CAUTION: Cluster MUST be stored in a face up position or damage will occur to the gauge operation.

REMOVAL
Disconnect the battery to ensure no DTCs are generated.
Remove the instrument panel top cover and cluster bezel.
Remove the four screws attaching cluster housing to the base panel.
Pull the cluster rearward to disconnect from base panel.
Remove the cluster assembly.
INSTALLATION
For installation, reverse the above procedures


TOP COVER AND CLUSTER BEZEL REMOVAL
REMOVAL
Use care not to scratch the panel. Lift up on the bottom outer areas of the cluster bezel and along the rearward edge of the top cover to disengage the clips Instrument Panel and Top Cover
Pull the top cover and cluster bezel rearward until the forward pins disengage from the instrument panel.
INSTALLATION
For installation, reverse the above procedures, making sure that the forward pins engage the index holes in the instrument panel. Position spring clips in instrument panel and push firmly until seated.