Chrysler Repair: MAP sensor on 2004 Chrysler Sebring, chrysler sebring, wire colors

Question
I need to replace the MAP sensor on a 2004 Sebring but not sure where it is located, I can't see it on the top side of the engine. Can you help, a diagram would be great but any help is appreciated

Thanks

Answer
Hi Johnson,
It it mounted on the driver side of the intake manifold plenum.
On the 6 cyl. there are a couple of round holes on the top surface of the manifold near by. On the 4 cyl engines it is on the manifold also, fairly close to the generator. In both cases the wire colors are black/light blue, violet/white, and dark green/red. If you buy the part first that too would help you ID it.
Roland
PS Sorry I don't have a document scanner but I think you should be able to find it.