Chrysler Repair: Chrysler Voyager A/C Control Lights Flashing, chrysler voyager, time calibration

Question
I have a 1998 Chrysler Voyager with the 3.3L engine.  The A/c is not blowing cold and the cooling fans don't seem to be coming one; as the car will over heat if running fro a while.  Also, the lights on the control buttons for the A/C and rear wipers are all blinking.  I can't seen to get anyone who can diagnose this properly.  Could you help?

Answer
CALIBRATION DIAGNOSTICS AND COOLDOWN ABORT
Test can be aborted by doing one of the following:

Depressing Rear Window Defogger, RECIRC and Rear Wiper buttons.
Cycling Ignition OFF and then ON.
Control will automatically abort after 15 minutes from the time Calibration Diagnostics and Cooldown was entered.
The HVAC control module will return to normal operation or may indicate unsuccessful Calibration Diagnostics or Cooldown test by LED's flashing simultaneously.



replace the cooling fan relay