Chrysler Repair: removing starter from 1997 Chryslar T&C, chryslar, bell housing

Question
Need a diagram of location of starter and location of bolts and wiring necessary to remove it.

Answer
Hi Michael,
I don't have a scanner so can't provide a diagram unless you can wait for a copy that I can mail to you. Let me know if you want that and what engine you have. If it is the 3.3/3.8L there is nothing complicated. Just disconnect the battery, raise the vehicle and support on a jack stand. Remove the the two wires from the solenoid. Remove the three bolts that hold the starter to the transaxle bell housing. Remove the starter, noting the spacer to be resused. Reinstall is the reverse.
Roland
PS Use the 'thank/rate' tab to get back to me without having to wait for me to be 'available to take a question. Use the comment section.

PPS The voting for 'expert of the month' ends tomorrow afternoon. If you would be so kind as to find the "nomination?" area of the 'thank/rate' tab and change the 'no' to a 'yes' that would give a vote. Thanks