Questionmy 1996 dodge neon won't start, changed the map sensor and the oil sensor,wires ,coil packs my codes say 911 and the the computer codes say it the timming belt ,but i checked it and it sdead on ,have no idea what it could be ,please reply,loss on what next to make it start,thks.
AnswerHi Luc,
I just saw your question, sorry for the delay.
May I suggest that you do a re-read of the codes? There is no code with three digits, they are all two-digit numbers. None of the code have a 9, so that has to be two separate numbers that total to 9. There is a code 11 but it should come out first. And did the readout end with two groups of 5 flashes each, i.e. the number 55? (It should have). So give it another try and let me know the counts. I don't know of a computer code for the timing belt, so what code was that? And what oil sensor was changed? the oil pressure sensor? And which wires were changed?
Tell me please what the flash counts are in the order they come out. Is the engine a 2.0L DOHC?
Roland
PS Use the "thank/rate" tab below to enter your message in the "comments" section. That way you won't have to wait for me to be 'available'. Once I get your re-count of the flashes we can go from there to figure this out.
