Chrysler Repair: Outside Mirrors, chrysler sebring, window mirror

Question
2001 Chrysler Sebring: How do you remove the driver's outside mirrir; power / w/o fold ?

Answer
REMOVAL
Remove side view mirror cover (Side View Mirror Cover).
Remove the door trim panel (Refer to 23 - BODY/DOOR - FRONT/TRIM PANEL - REMOVAL) .
Disconnect power window mirror motor wire connector, if so equipped.
Disengage wire harness grommet from mirror flag, if so equipped.
Disconnect manual mirror adjuster from side mirror cover, if so equipped.
Remove nuts attaching side view mirror to mirror flag (Side View Mirror).
Remove side view mirror from vehicle.


REMOVAL
Open door.
Lower window.
Disconnect battery
Open the screw cap from bottom of arm rest pull cup and inside remote handle.
Remove screws attaching door trim panel to door.(Front Door Trim Panel)
Remove screw attaching door latch handle to door panel.
Using trim tool, disengage clips holding trim panel to perimeter of door.
Lift trim panel upward to disengage upper retainer channel.
Tilt top of trim panel away from door.
Disengage clip holding latch linkage to back of release handle (Linkage Clip).
Disconnect main wiring harness at door opening.
Remove door trim panel from vehicle.