Chrysler Repair: wheel bearing, steering knuckle, axle nut

Question
Hi Kevin, thanks for the help. I' going to replace the r.f. wheel bearing on my 2005 sebring 4 door. I'd like to know what the torque is on the axle nut and what size the nut is. Thanks

Answer
Install 3 mounting bolts (Hub And Bearing Attaching Bolts) and tighten evenly to ensure bearing is square to face of steering knuckle. Tighten mounting bolts to 110 N·m (80 ft. lbs.)

I dont know the size right off the top of my head  I would say 28 to 33 inches