Chrysler Repair: hub assembly, chrysler sebring convertible, chrysler sebring

Question
Hi
On a 98 Chrysler sebring convertible - I have a bud beering on drive side - can i just replace the bearing on do i have to replace the whole hub assembly and if so how do you do so thanks very much Ed ortiz

Answer
Its a whole hub assembly and first remove the tire then remove the axle nut then on the back side of the hub perch where the rubber boot on the outer axle shaft you will find 3 inverted torax bolts remove those 3 bolts and pull the hub bearing off it might be rusted on but it will pull off and those bolts are tight and close to the axle boot but you can get to them