Chrysler Repair: 2003 chrysler neon indicatorswitch U.K, front fog lights, chrysler neon

Question
Hi Kev, I need to change the indicator switch as the front fog lights come on whenever they feel like it, often resulting in a flat battery, I have no experience on cars, is it possible to change it myself or do I need to book it into a garage, ?

Answer
REMOVAL
Disconnect and isolate the battery negative cable (DISCONNECT AND ISOLATE BATTERY NEGATIVE CABLE).
Remove both upper and lower steering column shrouds. (Refer to 19 - STEERING/COLUMN/UPPER SHROUD - REMOVAL).
Disconnect both posi-lock harness connectors at the rear of the multi-function switch (MULTI-FUNCTION SWITCH MOUNTING) and (MULTI-FUNCTION SWITCH - REMOVE/INSTALL).
Remove multi-function switch mounting screws (MULTI-FUNCTION SWITCH MOUNTING) and (MULTI-FUNCTION SWITCH - REMOVE/INSTALL).
The combination flasher must be transferred to new multi-function switch if replacing (MULTI-FUNCTION SWITCH MOUNTING).
The windshield wiper/washer switch must be transferred to the new multi-function switch. (Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WIPER/WASHER SWITCH - REMOVAL).