Chrysler Repair: Replace rear driving light bulb, chrysler grand voyager, rubber grommet

Question
How can I take the rear light assembly off the chassis to replace the rear driving bulb on Chrysler Grand Voyager 2005

Answer
REMOVAL
Disconnect and isolate the battery negative cable.
Raise the liftgate.
Remove the two retaining fasteners by prying under the head of the fastener with a flat bladed tool (TAIL LAMP UNIT FASTENERS).
Rotate the lamp away from the vehicle body to disengage hook from the rubber grommet in the quarter panel opening.
Disconnect wire harness connector from tail lamp unit by sliding the red lock, then pressing release tab.