QuestionQUESTION: How do I replace the driver side mirror? Does the whole panel have to be removed ?
Also, I need to replace my headlight on the driver side, I have not been able to determine which screws to remove on the frame to loosen the bracket, could you help?
ANSWER: 2 door 4 door convertible?
---------- FOLLOW-UP ----------
QUESTION: It is a 4 door sedan
ANSWER: REMOVAL
Open door.
Lower window.
Disconnect battery
Open the screw cap from bottom of arm rest pull cup and inside remote handle.
Remove screws attaching door trim panel to door.(Front Door Trim Panel)
Remove screw attaching door latch handle to door panel.
Using trim tool, disengage clips holding trim panel to perimeter of door.
Lift trim panel upward to disengage upper retainer channel.
Tilt top of trim panel away from door.
Disengage clip holding latch linkage to back of release handle (Linkage Clip).
Disconnect main wiring harness at door opening.
Remove door trim panel from vehicle.
---------- FOLLOW-UP ----------
QUESTION: Could you tell me how to change the drivers side headlight? Where are the screws that release the main housing of the bulb?
AnswerREMOVAL
Disconnect and isolate the battery negative cable.
Remove the two retaining screws.
Remove upper fascia retainers by prying under the head of the fasteners with a flat bladed tool.
Remove headlamp unit from fender side first, then pull headlamp unit out (Headlamp Unit).
Disconnect the wiring harness from the bulbs.
Remove the headlamp unit.
