Chrysler Repair: Headlight problem - 97 Concorde w/DRL, drl module, high beams

Question
Well, when I turn my headlights on, the left side is High Beam, and the right side is Low beam. When I hit the switch to turn on the high beams, the right becomes High beam, and the left becomes low beam. Any ideas people? I've checked the DRL module, and it's Ok, as well as checked assosciated grounds. Thanks.

Answer
Hi Adam,
That is an interesting state of affairs. It is almost as if someone switched the wiring to the left headlamp except that the wires for the two bulbs are on different plugs at the juncion block. I am wondering if the plugs at the bulbs themselves are reversed on the left side? The low beam should have a violet wire and the high beam a red wire. If the plugs are identical and the harness permits it, all you would have to do is exchange the plugs at the bulbs themselves to solve the problem, in any case.
Let me know what you find, please.
Roland