Chrysler Repair: 1996 Chrysler Cirrus headlight assembly, 1996 chrysler cirrus, headlamp bulb

Question
Hi, I was wondering if you could tell me how to get the headlight apart to replace the bulb?  In addition, there is warm air blowing from the floor on the drivers side, even when the A/C is blowing out ice cold.  Any ideas?  I just got this car and I'm not familiar with Chryslers...Thanks so much!!!

Answer
I live in Atlanta and can look at it for u.
HEADLAMP BULB
REMOVAL
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

Release hood latch and open hood.
Remove screws holding headlamp module to radiator closure panel.
Separate headlamp module from radiator closure panel.
Disengage wire connector from back of headlamp bulb Headlamp Connector
Rotate retaining ring counterclockwise one quarter turn.
Separate retaining ring from headlamp module Headlamp Bulb Retaining Ring
Pull bulb from headlamp module Headlamp Bulb
INSTALLATION
Reverse the preceding operation


The air part  could be a door  or motor issue .