Chrysler Repair: 2000 Sebring, inlet hose, thermostat

Question
Where is the thermostat located in a 2000 Sebring.  2.5l v6

Answer
THERMOSTAT - 2.5L ENGINE
REMOVAL
Drain cooling system to the thermostat level or below.
Remove inlet hose and coolant inlet elbow from thermostat housing Thermostat, Housing and Inlet Elbow - 2.5L Engine
Remove thermostat assembly, and clean sealing surfaces.
INSTALLATION
Install thermostat into the recess in the thermostat housing.
Install inlet elbow and tighten the bolts to 19 N·m (168 in. lbs.) Thermostat, Housing and Inlet Elbow - 2.5L Engine
Fill cooling system. Refer to Cooling System Refilling in this section