Chrysler Repair: AC Acutator Calibration, plymouth grand voyager, slide pots

Question
Hello Kevin
I have a 97 Plymouth Grand Voyager.  The LEDs on my console where the climate control knobs, the AC switch and the rear wiber switch is located at are blinking.  I had the same problem with a similar Plymouth Van I had.  I know that there is a combination of buttons to press to reset the AC Actuator which fixes this problem and the LEDs stop blinking and the AC works fine after wards.  Do you happen to know what that combination is?
I will appreciate your fast reply since I will be putting this Van up for sale and i want to make sure that it is in top condition with everything working on it.
Thanks for your help.

Answer
CALIBRATION/DIAGNOSTICS TEST ENTRY
TO INITIATE TESTS:
Set Blower motor ON HIGH
Set Mode position to Panel
Open all A/C outlets
Set Temperature to Cold (Both slide pots if equipped)
Depress WASH and REAR WIPER button simultaneously for 5 Seconds (Until all LED's light)
RESULTS:
All LED's will turn on for 5 Seconds
Calibration Test is running when REAR WIPER and INTERMITTENT are alternately flashing. Cooldown test is running if A/C and RECIRC are alternately flashing.
Acceptable results is REAR WIPER LED is the only LED flashing. Push Rear Wiper to exit.
After all tests have passed, Calibration Diagnostics and Cooldown can be run separately.
COOLDOWN TEST ENTRY