Chrysler Repair: 95 cirrus- need to find a control module, haynes manual, wiring diagrams

Question
Hey Kevin!  I'm having trouble with a 95 Cirrus LXi (2.5L V6 engine).  I know the problem somehow involves the factory installed anti-theft feature, but I can't find where this actually exists in the wiring (at the moment the diagrams I have are from the back of a Haynes manual, & seem perhaps they're incomplete?).  I want to know if there's a module that controls this, or if it's all programmed into the PCM, or what...  Specifically, there are two different aspects to the feature- 1)the lights flashing and horn blaring, and 2)there's some sort of an interrupt that shuts the engine off about 1-2 seconds after starting it.  At the moment I am having problems with #2 manifesting itself intermittently.  I could previously solve this by instigating the response of #1, and then deactivating it by manually locking/unlocking the doors.  After this, the car would start without a problem (flawlessly, I did this a couple times a week at least).  Unfortunately, that trick stopped working about a month ago, so it seems like something in the electronics is deteriorating in there...  Do you know where I could find detailed wiring diagrams, or do you know what module(s) control the antitheft features on this particular car?  Any help would be greatly appreciated!

Answer
The anti theft is built into the BCM and has stuff tied in via the bus the PCM. SO u have 2 things  first u never did have an alarm and the software got corrupt and now it thinks it does  or 2 u have a real issue with the alarm and will need a DRB3 to tell what with is really wrong. I cant give u a wire diagram its to big  to may pages.