Chrysler Repair: Rear lighting color codes for 1997 Voyager, set ups, flatbed trailer

Question
I need help to connect a harness for pulling a flatbed trailer.  Can I use a flat 4 wire harness?  I need to identify wires by colors.  Left turn? Right turn? Tail light?  Brake light?  Can you help with the wire colors, please.

Answer
Hi Penny,
I am sorry to not know about the type of harness to use, but most trailer rental places have the adapters. The Left turn is dark green/red, the Right turn is brown/red, the tail is dark green/yellow on the right side and brown/yellow on the left side so take your pick, and the brake light is white/tan on the left and white/tan on the right. All four bulbs are dual purpose (a tail filament and then either a stop or turn filament in each bulb). This is from the '98 manual but it is very likely the same for your '97, unless there is only one dual purpose bulb on eash side and then tails are black/yellow and the stop/turn on the left is dark green/red and on the right is brown red which are what is shown for the '95. I don't have a '97 manual but it has to be one or the other of these set ups.
Roland