Chrysler Repair: Automatic Load levelling Relay, rear quarter panel, chrysler new yorker

Question
My 1990 Chrysler New Yorker 5th Avenue has recently stopped automatically leveling for loads.  I have replaced the Circuit Breaker in the fuse panel.  I'm looking to replace the Load Leveling relay next before more costly options (compressor/sensor shock.)  Is this particular relay located in the engine compartment relay box or elsewhere in the vehicle?  I'm pretty sure that the compressor/sensor shock still work however a recent voltage overload has knocked out one or two other relays.

Answer
Hi Eric,
I am having to rely on the '89 shop manual for this one. In that year the relay is located in the right rear quarter panel alone with the compressor and control module. You get at it via the trunk. Just below the multi-pin plug for the module is the plug for the relay. I hope that is the same as with your '90. There is a good write-up of the system in the '89 manual, so let me know if the relay doesn't solve the problem. The fuse #7 (20 amp) is also in the circuit.
Roland