Chrysler Repair: 1996 chrysler van 3.8 engine . how do i change the rear spark plugs, manual roland, haynes manual

Question
 

Answer
Hi Earl,
According to the Haynes manual, this is what you do:
for the #1 plug:

remove the drivebelt for the alternator,
remove the 4 alternator bracket bolts and push the alternator rearward
remove the spark plug cap (don't pull on the wire, just around the edge of the cap)
for the #3 and #5:
remove the resonator and the intake strut bolt at the cylinder head
remove the intake strut bolt at the intake manifold and swing the strut out of the way,
remove the plug caps,etc.
I haven't done this myself, so I can only pass along the procedure from that manual.
Roland