Chrysler Repair: clock, chrysler dodge, eagle model

Question
It is an indash mount (stand alone) clock. Is there a reset button that I can not find? Cause I didn't see one on there. Maybe I missed it.
-------------------------
Followup To
Question -
I have a 1991 Chrysler Eagle Premier. The battery was disconected and then was later reconnected. Now the clock does not work. Is there any way I can fix this?
Answer -
Hi Ryan,
Is this part of the radio display? Does it read 12:00, which is typically what happens when you disconnect the battery. But it should begin running from the point when you hook it up. You usually need to resest the clock unless you reconnect it at noon or midnight. So let me know exactly what you mean by "does not work" and whether it is part of the radio or if it is a stand alone clock on the dash?
Roland

Answer
Hello Ryan,
If it is digital it probably does have a couple of tiny push buttons that you can access with a nail or tip of a pencil. If it is analog there may be a small knob at the center of the dial that projects through the lens that you can turn, or push in and turn. I only have manuals on the Chrysler/Dodge/Plymouth model all of which seem to rely on the radio dial for a digital clock readout. Other than that, I can't offer anyother advice on your Eagle model. You might want to check back side of the dash to make sure the wires are attached, and also check the fuse or fuses for the dash.

Roland