Classic/Antique Car Repair: solenoid conversion, solenoid, solenoids

Question
Please disregard last nights response to your question back to me about 3 or 4 lug solenoid. My Remote solenoid is a conventional 4 lug(2 large on outside and 2 small on inside.

                       Thanks,
                         Dave D.

Answer
Sorry for the delay, but time just gets away from me. The two small terminals should have a letter near them. One with be an "I" and the other will be an "S". The I terminal connects to the + side of the ignition coil and send voltage to the coil during key on cranking. The other connects to the start wire on the ignition switch to send power to the solenoid with the key in the start position. These solenoids need to be grounded when operating as the operating coil in the solenoid grounds through the mounting screws.
Brad