QuestionQUESTION: hello my truck is stuck in drive and it stays in drive even if i put it into reverse or neutral. even after i turned it off then back on, it was still in drive.
ANSWER: Whats your linkage doing on the tranny?
If your only observing what your shifter is doing inside the cab and its going through the gears it sounds like its off under the truck.
take good look at all your linkage under truck
Let me know
Mike
---------- FOLLOW-UP ----------
QUESTION: what am i looking for? i see a cable line sort of low with a piece of square-ish looking metal hanging on it. should that metal holding the cable in place?
Answerthe square bracket should be attached by 2 bolts on your tranny pan so in other words
your shift cable should drop down towards the trans linkage there should be a bracket attached to to trans to hold cable in place then the cable will attach to metal piece about 3 inch long with square slot that is bolted to rod that is squared off at end sticking out of tranny.
Its real simple
Im not sure on how else to guide you with fixing this, What you need to do is get undernieth the truck look at everything and just use commen sence, say ok cable attaches here, and then it should attach here
It should attach to side of tranny , look for that small rod with squared end and hold in end for bolt
let me know
Mike
