Classic/Antique Car Repair: 56 Chevy Belair, 56 chevy belair, flapper

Question
Roger- How would you align the passenger side window on the above?  
When I close the door,  you call tell the window doesn't completely set
right,  therefore not setting the flapper correctly until I slightly push on
the window then all sets right.

Thanks----James

Answer
James
Hi;  well first off is it the felt that is worn that is causing it.if yes, try some spray silicone on the felt. if not you will have to remove the door panel and try to adj. the window as needed. you have to remove the window and door handles , there is a (c) shaped clip in the back of each Handel that must come off first.