Classic/Antique Car Repair: motor, valve adjustments, roller tip

Question
the cam and lifters are both hyd. and also how can you tell if a power valve is blown on a holley 600 thanks for your time
-------------------------------------------
The text above is a follow-up to ...

-----Question-----
what are the valve adjustments for a 73' chevy custom deluxe pick up with a 350 c.i.d? the motor has fuelie heads, flat top pistons a edelbrock gear drive and a 268 comp with roller tip 1:5 rockers and also what should the timing be set at? thanks for time also im 16 years and doing this on my own so any advice or tips would be greatly appreciated
-----Answer-----
is it solid or hyd. lifters/cam/

Answer
if you have hyd. than all you have to do is take one at a time loosen the rocker till it clacks than turn it in till it stops than 1/2 to 3/4 a turn more and do it slow as it can stall , if so thats nornal do each one that way but no more than 3/4 of a turn and as far as the carb are the plugs all wet with gas and do you have a lot of blue smoke ?