Dodge Repair: Passenger side headlight assembly replace, haynes repair manual, 1999 plymouth voyager

Question
QUESTION: I have a 1999 Plymouth Voyager Expresso an I need correct instructions on how to replace the passenger side headlight moduale.My fix it book does not supply info that I understand.

ANSWER: u mean the headlight assembly?   there is not a module for the headlights

---------- FOLLOW-UP ----------

QUESTION: You are right LOL I just used the term that my Haynes repair manual used. Yes I need instructions on how to replace the passenger side headlight assembly. Thank You

Answer
Minor amounts of fogging may occur around the edges of the headlamp lens when exposed to humid conditions. This is considered normal. The fogging will dissipate with increased ambient temperature or headlamp usage.

REMOVAL
1.Release hood latch and open hood.
2.From inside engine compartment, remove nuts holding headlamp module to radiator closure panel.
3.Remove screw holding top of module to closure panel.
4.Remove headlamp module from radiator closure panel Headlamp Module - Typical
5.Disconnect wire connectors from back of headlamp module.
6.Separate headlamp module from vehicle
INSTALLATION
1.Place headlamp module in position on vehicle.
2.Connect wire connectors into back of headlamp module.
3.Place headlamp module in position on radiator closure panel.
4.Install nuts to hold headlamp module to radiator closure panel.
5.Install screw to hold top of module to closure panel.
6.Verify headlamp operation and alignment.