Dodge Repair: crank sensor 2000 dodge ram, crankshaft position sensor, dodge ram 4x4

Question
where is the crank sensor located on a 2000 dodge ram 4x4 k1500 v-8 mag pickup?

Answer
CRANKSHAFT POSITION SENSOR - 3.9L/5.2L/5.9L ENGINES
REMOVAL
The sensor is bolted to the top of the cylinder block near the rear of right cylinder head Crankshaft Position Sensor

1.Remove the air cleaner intake tube.
2.Disconnect crankshaft position sensor pigtail harness from main wiring harness.
3.Remove two sensor (recessed hex head) mounting bolts Crankshaft Position Sensor
4.Remove sensor from engine.
INSTALLATION
1.Position crankshaft position sensor to engine.
2.Install mounting bolts and tighten to 8 N·m (70 in. lbs.) torque.
3.Connect main harness electrical connector to sensor.
4.Install air cleaner tube.