QuestionQUESTION: how do i get to the bulb on the passenger-side...i was lucky on the drivers side i could reach it from the inside... no such luck on the passenger side... online talks about removing 3 bolts from the front? don't see any?
ANSWER: need to know what kinda car this is to start with
---------- FOLLOW-UP ----------
QUESTION: sorry, its a 2001 dodge durango... and i am talking about the head light lamps... how to replace them... like i said i was able to do the one on the drivers side blindly from inside the engine compartment but no such luck on the passenger side...i see no way to take it our from the front?? online services talk about three bolts... don't see them... help!
AnswerREMOVAL
Disconnect and isolate the battery negative cable.
Remove the bolts attaching headlamp to the inner fender panel (Headlamp).
Grasp the headlamp and firmly pull the headlamp to disengage it from the panel.
Disengage the connector from the headlamp bulb.
Separate bulb from headlamp.
Remove the bulb sockets from the front park/turn signal/side marker lamps
Separate headlamp module from vehicle
